Furuno NAVNET 3D MFD8/12/BB - Power Connections

20
2.1.2. MFDBB Overview
2.2. Power Connections
2.2.1. MFD8/12
The MFD8/12 can be powered directly using nominal 12V or 24V DC.
Only use the power cable supplied with the unit and connect it to the Power Connector
at the rear of the unit.
2.2.2. MFDBB
The MCU001 - MFDBB processor unit can be powered using 12V or 24V.
Make the power cable as shown below.