23
Wiring Information
Pin No. Color Function
7 Shield Shield
6 Black GND
5 Red 12V_OUT
4 Green RD1-C
3 Yellow RD1-H
2 Blue TD1-B
1 White TD1-A
2.3.3. DATA 2 Description
DATA2 can be used to connect additional NMEA 0183 instruments. Use the included
cable assembly FRUDD-18AFFM-L180 (FUSA P/N 000-164-608). This included Pig-
Tail Cable has an 18-Pin connector. DATA2 also provides additional Inputs/Outputs
(Buzzer, Event …). For example, a MOB contact closure input may be connected to PIN
15 and 11*.
*Note that any MFD will interface to virtually any MOB System or Event switch (Point
Save) contact closure signal using these pins.
To Next Page
Loading...
