EasyManua.ls Logo

Furuno NAVNET 3D MFD8/12/BB - DRS (Radar) Connection

Furuno NAVNET 3D MFD8/12/BB
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
2.5. DRS (Radar) Connection
Up to two DRS (Digital Radar Sensors) can be connected to a NavNet3D network.
Every DRS comes with a supplied 15 Meter cable (FUSA P/N 000-167-636). Other
cable lengths may be purchased if necessary (Note that the part numbers for the
DRS25A are different):
- 10 Meter Cable (FUSA P/N 000-167-635)
- 20 Meter Cable (FUSA P/N 000-167-637)
- 30 Meter Cable (FUSA P/N 000-167-638)
The Radar cable is a “Siamese” type cable that carries power (48V) and Data
(Ethernet). All MFD have a dedicated Power Port (48V) used to connect the Radar
Power Cable. Some combinations require an additional Power Supply Unit (PSU) in
order to provide enough power for the DRS. Please refer to the following table:
DRS2D DRS4D DRS4A DRS6A DRS12A DRS25A
MFD8 PSU-012 PSU-012 PSU-012 PSU-013
MFD12 PSU-012 PSU-013
MFDBB PSU-013
Note: DRS25A antenna includes PSU-013 as standard supply

Table of Contents

Related product manuals