52
is available again or the alarm is acknowledged (by key operation). Off:
Alarm sounds three times.
-After completing the NMEA0183 Configuration Procedures on the Master and Slave
MFDs, return to the Master MFD to complete the installation process.
-Click “Next” at the Master MFD to continue the configuration
3.3. Installation Wizard Global Settings
Usually, the Global Settings are performed from the Master MFD in the network
3.3.1. Boat Parameter Settings
First, choose the unit you want to use to enter the boat dimension, and then enter the
dimension in the appropriate fields.
Click on “Next” to continue the Analog Display tab
3.3.1. Engine Parameters (Analog Display)
When an Engine(s) with a NMEA2000 Port is connected to an MFD in the network, the
Maximum Value of the RPM, Oil and Boost pressure needs to be set up in order to
correctly adjust the scale of the Analog Engine Gauges.
To Next Page
Loading...
