Furuno NAVNET 3D MFD8/12/BB - Page 56

56
“Own” settings for each MFD(s) before being able to select the corresponding
instruments as a data source.
Select the “Data Source” Tab. This tab allows you to select the Primary System Data
Source for various data types used by the Navnet 3D Network.
Name Description Example
Position & SOG/COG Choose the position-fixing
sensor to use.
GP-320B, GP-330, NMEA
2000 format GPS
Heading Choose the heading sensor
to use
SC-30, SC-50, PG-500,
PG-1000, Other
Speed Through Water Choose the speed (STW)
sensor to use.
Smart sensor (NMEA
0183), Speed sensor
(ETR), Smart sensor
(NMEA 2000), Other
(NMEA 0183)