2. WIRING
2-9
2.9 Transducer (Option)
The 12-10P conversion cable (FRU-CCB12-MJ-01, 0.4m, supplied) is required when
connecting a transducer that has a 10-pin connector to TZT16F. Matching Box MB-
1100 is also required when connect 1kW transducer to TZT16F. See the interconnec-
tion diagram for transducer connection. The transducer that has a 12-pin connector
060928 ISO Address Claim For Certification
• Address autonomy
• Receiving output requirement
126208
NMEA-Request group
function
For Certification
• Address autonomy
• Receiving output requirement
NMEA-Command group
function
For Certification
Changing the setting of other equipment
NMEA-Acknowledge
group function
For Certification
Sending the confirmation for NMEA-Request group function
and NMEA-Command group function
126464
PGN List-Transmit
PGN’s group function
For Certification
Receiving output requirement
PGN List-Received
PGN’s group function
For Certification
Receiving output requirement
126992 System Time 1000
126993 Heartbeat
126996 Product Information For Certification
Receiving output requirement
127250 Vessel Heading 100
127251 Rate of Turn 100
127257 Attitude 1000
127258 Magnetic Variation 1000
128259 Speed 1000
128267 Water Depth 1000
129025 Position, Rapid Update 100
129026 COG & SOG, Rapid
Update
250
129029 GNSS Position Data 1000
129033 Local Time Offset 1000
129283 Cross Track Error 1000
129284 Navigation Data 1000
129285 Navigation-Route/WP
Information
• Outputs when waypoint is set/changed (own ship’s
position is required)
• Outputs when receiving ISO request
130306 Wind Data 100
130310 Environmental
Parameters
500
130312 Temperature 2000
130313 Humidity Outputs when receiving the ISO request
130314 Actual Pressure 2000
130316 Temp., Extended Range 2000
PGN Description Remarks Output cycle (msec)
To Next Page
Loading...
