3. HOW TO SET UP THE EQUIPMENT
3-3
3.1 How to Set Time Zone, Time Format and Lan-
guage
Before setting up your equipment, select the time zone, language and units to use on
your equipment as shown below.
1. Tap the [Home] icon to show the home screen and display mode settings.
2. Tap [Settings] to show the [Settings] menu.
3. Drag the menu to display the [General] menu item, then tap [General] on the main
menu to show the [General] menu.
4. Drag the menu to show the [Local Time Offset] menu item, then tap [Local Time
Offset] to show the numerical keyboard.
5. Input the time difference (using 15-minute intervals), then tap [].
6. Drag the menu to show the [Time Format] menu item, then tap [Time Format] to
show the option window.
7. Select how to display time, in 12- or 24-hour format. [Auto] automatically inserts
AM, PM indication in 24 hour clock, when the language is English.
8. Tap the [<] at the top left of the screen to return to the [General] menu.
9. Tap [Language] to show the [Language] menu.
10. Tap the appropriate language to use. The unit will display a confirmation mes-
sage. Tap [OK] to restart the unit and apply the new language settings.This pro-
cess takes approximately five minutes to optimize the system for the new
language setting. When the process is completed (five minutes later), the system
restarts automatically.
To Next Page
Loading...
