32
Gap between cap
n
Thread
Thread
Gap: Approx. 2.6 mm
Gap: Approx. 2.6 mm
Gap: Approx. 2.6 mm
OR
approx. 1 thread
How to tighten cap nut
DO NOT OVERTIGHTEN
screw
7. Coat the surface of the teflon washer
and connecting part of the cable
with supplied silicone sealant.
8. Tighten the DRU cap nut until the cap nut
contacts the surface of the DRU. The cap nut
is correctly tightened if approx. one thread of
the cap nut is visible.
9. Coat the area around the cable connection
and the cap nut with silicone sealant for
waterproofing.
To Next Page
Loading...
