33
How to fix the DRU to the mounting base
A
Loop : >30cm
Fix the rocker pins.
- Mounting base "A" to be supplied
by shipyard.
- Fix the DRU on the compass deck.
- Select the location where the DRU
can be easily maintained.
- Locate well away from other equipment.
- Do not cut the cable even if it is too long.
- Loop the cable and bind it with cable ties.
Then fix the cable near the DRU but
do not fix to the handle.
- Fix the cable between the DRU and loop
with cable ties.
The radius of the loop must be more than
15 cm.
Do not loop the cable around the
handle of the DRU to keep the radius of
the loop more than 15 cm.
To Next Page
Loading...
