34
How to connect the cable to the DCU
Connect the cable to the DRU port J8 in the DCU and fix it with a cable tie. Using vinyl tape, tape
from tip of connector to about 8 cm.
Fix the cable to the support plate with the cable tie.
Optional Kit
The optional kit is provided for the IEEE1394 cable run through the deck.
Name: Gland gasket OP24-16, Code number: 001-046-260
Name Type Code No. Qty
Gasket 24-004-1503 100-347-370-10 1
Washer 24-004-1504 100-347-380-10 4
To Next Page
Loading...
