53
Battery Replacement
1. Slide the transmitter battery cover in the arrow
direction while pressing the part shown in the figure.
2. Replace the NiCd battery pack or dry cell batteries.
3. Slide the battery cover back onto the transmitter.
NiCd Battery system
The NiCd battery is connected by a connector so that it
can be removed when you will not be using the
transmitter for a long period of time, or when
replacing a discharged battery with a spare battery.
CAUTION - DO NOT pinch the NiCd battery wire
when sliding the lid closed. If the wire is damaged,
abnormal heating and fire may result.
While pressing this part.
To Next Page
Loading...
