FUTABA 3PM User Manual

38
Functions
Forward acceleration amount
0~100
Initial value: 0
Brake side acceleration amount
0~100
Initial value: 0
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.
Carburetor
Servo horn
Brake side
A slight clearance is required at the linkage, but the
throttle acceleration function acts to reduce the time
lag caused by this clearance.
Throttle acceleration / ACC
Gasoline engine cars have a small time lag at both the forward side and brake side
because a certain clearance is necessary at the linkage. Reducing this time lag at the
transmitter side provides the same sharp response as electric motor cars.
Operation
- Operation near the throttle trigger neutral position
becomes a sharp rise.
- The forward and brake sides can be set separately.
Set value
The standard value (100% point) of this setup effects the operation amount set by
throttle EPA function.
Setup items
ACC-FW : Forward side acceleration
amount
ACC-BK : Brake side acceleration
amount
BRAKE
FORWARD
(Initial screen)
Press "SEL" key to select the
desired function screen.
Calling the setup screen
(Setup screen)
Press "CH" key to select the next set-
up screen.

FUTABA 3PM Specifications

General

Brand	FUTABA
Model	3PM
Category	Remote Control
Language	English