53
Functions
HRS/PPM mode selection
1 (Mode selection)
Use the (+) or (-) button to select the mode.
2 When ending adjustment, turn off the power switch before use.
HRS/PPM Select / MOD
The signal mode output from the transmitter can be changed. (PPM/HRS)
Receiver
When using an FM receiver set to the PPM side and when using an HRS receiver set
to the HRS side.
- When the mode was changed and when a model of a different mode was
selected, signals are output in the mode set at the point at which the
transmitter power was turned back on.
Signal mode
HR: HRS mode
PP: PPM mode
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
2. Next, use "SEL" key to select
the desired function screen.
To Next Page
Loading...
