23
TRANSMITTER DISPLAYS & BUTTONS
reversed, and travels and trims will be wrong, potentially leading to a crash.
JOG KEY:
Control JOG KEY to scroll up/scroll down/scroll left/scroll right and select the option to edit within a
function. When the menu has multiple pages, move the JOG KEY horizontally (left or right).
Press JOG KEY to select the actual function you wish to edit from the menu.
Press JOG KEY and hold one second to confirm major decisions, such as the decision to: select a
different model from memory, copy one model memory over another, trim reset, store channel position
in FailSafe, change model type, reset entire model, condition of a helicopter setup is changed. An on
screen inquiry will ask if you are sure.
Press JOG KEY again to accept the change.
＋
KEY:
Press and hold
＋
KEY for one second to open programming menus. It uses for change of a setup, or a
numerical increase. Change of the page of a menu can also be performed.
−
KEY:
It is used for change of a setup, or reduction of a number. Change of the page of a menu can also be
performed.
END BUTTON:
Press END BUTTON to return to previous screen. Closes functions back to menus, closes menus to
start-up screen.
hows the c m lated N time. (ho rs:min tes)
1
(min tes:seconds)
hows the c m lated N time or each model.(ho rs:min tes)
hows the c m lated N time.(ho rs:min tes)
elect the desired timer with . he timer display
lashes. o reset the timer press .
ࠉ -H H
−
＋
To Next Page
Loading...
