30
PARAMETER
submenu:
S-FHSS
or
FHSS
]?
trim on channel 3 (
ATL
)?
using the
MODEL RESET
: see p. 28.
(ACRO)
(HELI)
MODEL TYPE
: sets the type of programming used for this model.
The T8J has 20 model memories, which can each support:
ACRO
elevator servos,
ELEVON
, and
V-TAIL
for further information.)
MODEL TYPE
for details, p. 30.
MODEL TYPE
(Each model memory may be set to a different model type.) If your transmitter is a T8JA, the default is
ACRO
. If it is a
HELI(H1)
.
ACRO
is the best choice for most powered airplanes:
ACRO
adds:
SNAP-ROLL
AILEVATOR
(twin elevator servo support)
IDLE-DOWN
,
THR-CUT
,
THROTTLE-NEEDLE
mixing and
THROTTLE DELAY
programming.
MODEL TYPE
MODEL TYPE
GOAL of EXAMPLE: STEPS: INPUTS:
Select the proper
MODEL TYPE
for your
model. Ex:
ACRO
.
[NOTE: This is one of several functions
Open the menu, then open the
PARAMETER
submenu.
for 1 second.
to
PARAMETER
.
Go to
MODEL TYPE
.
to
TYPE
.
Select proper
MODEL TYPE
.
Ex:
ACRO
.
to
ACROBATIC
. for 1 second.
Sure?
displays.
To Next Page
Loading...
