FUTABA 8J - Throttle and Pitch Curve Adjustments; Throttle Curve (THR-CURVE) Setup; Pitch Curve (PIT-CURVE) Setup

64
Throttle curve (
THR-CURVE
)(
ACRO
):
Pit curve (
PIT-CURVE
)(
ACRO
):
This function adjusts the throttle operation curve for optimum engine response

NOTE: If the throttle
EXP
function is activated, you cannot use
THR-CURVE
function simultaneously.
This function is an object for the variable pitch propellers of an airplane.


Adjustability:

GOAL of EXAMPLE: STEPS: INPUTS:
Adjust throttle curve until engine idles
reliably.
Open the
THR-CURVE
function.
for 1 second.
to
THR-CURVE
.
Activate the function.
to
MIX
. to
ON
.

position.
Switch E in up position.
to point 1 (
P-1
). to desired
throttle servo position.
Repeat above steps.
Adjust the next switch position. Repeat above steps.

to
SW
. to desired switch.
Close.
Adjustability:

GOAL of EXAMPLE: STEPS: INPUTS:
Adjust pit curve until engine idles . Open the
PIT-CURVE
function.
for 1 second.
to
PIT-CURVE
.
Activate the function.
to
MIX
. to
ON
.

position.
Switch E in up position.
to point 1 (
P-1
). to desired
Pit position.
Repeat above steps.
Adjust the next switch position. Repeat above steps.

to
SW
. to desired switch.
Close.