FUTABA 8J - Gyro Gain Example; Setting Up Heading-Hold;AVCS Gyro

88
Gain Example for AVCS/Heading-hold Gyros (
GY
)
GOAL of EXAMPLE: STEPS: INPUTS:
  
   

up 3 and normal.
Open and activate the
GYRO SENSE
function.
for 1 second.
to
GYRO SENSE
.
Activate the function.
to
MIX
. to
ON
.

hold (
GY

to
TYP
. to
GY
.

Ex: select
Cond

to
SW
. to
Cond
.
Adjust gyro rates as needed.
(Ex:
NORM
,
IDL3
to
NOR 50%
.
IDL1
and
2
to
AVC 50%
as starting points.)
to
NORM
. to
NOR 50%
.
to
IDL1
. to
AVC 50%
.
Repeat.
Close the function.
Where next?
GOVERNOR
: see p. 89.
D/R
,
EXP
: see p. 39.
DELAY
: see p. 84.
50%0% +100%
"Heading Hold Mode"
"Normal Mode"
CVA %001%0RON %001
GY
STD



CH
.