To Next PageTo Next Page
Need help?Do you have a question about the Future light Spotlight MH-660 and is the answer not in the manual?
General| Brand | Future light |
|---|---|
| Model | Spotlight MH-660 |
| Category | Speakers |
| Language | English |
General safety precautions for installation, operation, and maintenance.
Warning about the danger of electric shock from high voltage.
Warning to avoid looking directly into the light source.
Conditions and restrictions for operating the fixture safely and correctly.
Step-by-step guide for installing, adjusting, and replacing the lamp safely.
Critical warning about electrical hazards and lamp wattage during installation.
Instructions and safety warnings for mounting the fixture onto a truss or structure.
Warning about flammable materials near the fixture during installation.
How to mount the fixture on stage or truss and use a safety rope.
Details on connecting the fixture to the power supply and wiring.
Guide for connecting the fixture using DMX cables and building a DMX chain.
Important note on terminating the DMX signal chain to prevent errors.
Explains the functions of DMX channels 1-5 in 16-bit mode.
Details Pan and Tilt movement control via DMX channels 1 and 2.
Precise Pan and Tilt control using 16-bit resolution on channels 3 and 4.
Controls the speed of Pan and Tilt movements via DMX channel 5.
Control of lamp status, reset function, and fan speed via DMX channel 6.
Control of the colour wheel and rainbow effects via DMX channel 7.
How to set the DMX address for the fixture using the control board.
Overview of the fixture's control panel and its functions.
Procedure for setting the DMX address using the control board.
Critical safety warning before performing any maintenance.
