UM-STO-C Revision C 8
Operators and Technicians
PSA-66-001N
2.2 Printer Sensor Functions
There are 6 primary sensor functions on the PSA-66-ST printer:
• Paper out
• Paper level low
• Paper taken
• Paper jam
• Printer platen engaged
• Printer opened
These sensors work in conjunction with the game firmware to provide reliable trouble-free operation. Any
error conditions as a result of these sensors will be indicated by the front bezel light and keypad LEDs.
2.3 Paper Loading
Generally, the only service required for printer is to load new paper stacks. This section provides a step
by step description of how to load paper to the unit. The automatic paper loading feature of this system
simplifies this process to essentially two steps; putting the paper stack into the printer paper tray, and
presenting paper to the paper feed slot in the printer. The platen release lever, the paper advance button
and the cutter operate button are merely provided as supports for this process, and usually are not
required to load paper.
To Next Page
Loading...
