4. Operating System and Equipment
Exterior Rear-View Mirror Tilting-down in
Reversing*
Saving Modes of Mirror Surface Position:
1. Manual saving:
– Switch the ignition switch to "ON" position,
enter "Vehicle Setting → Smart Body" in the
audio system to enable the function of
"Exterior Rear-View Mirror Manual Tilting-
down in Reversing".
– Depress the brake pedal and engage in "R"
gear.
– Adjust the exterior rear-view mirror surface at
corresponding side to the position suitable in
reversing, release the brake pedal after
adjustment to save the position at the position
of tilting-down in reversing.
2. Automatic saving:
– Switch the ignition switch to "ON" position,
enter "Vehicle Setting → Smart Body" in the
audio system to enable the function of
"Exterior Rear-View Mirror Automatic Tilting-
down in Reversing".
– Click the soft button "Setting" of exterior rear-
view mirror automatic tilting-down in reversing,
adjust the angle of exterior rear-view mirrors
at both sides to the position suitable for tilting-
down in reversing, click "OK" after adjustment
to save the position.
Activating the function of manual tilting-down in
reversing
– The function of "Exterior Rear-View Mirror
Manual Tilting-down in Reversing" under the
audio system is in the enabled state.
– Switch the ignition switch to "ON" position,
depress the brake pedal and engage in "R"
gear.
– Select the "L" or "R" exterior rear-view mirror.
– The mirror tilts to the position saved.
Activating the function of automatic tilting-down in
reversing
– The function of "Exterior Rear-View Mirror
Automatic Tilting-down in Reversing" under
the audio system is in the enabled state.
– Switch the ignition switch to "ON" position,
depress the brake pedal and engage in "R"
gear.
– The exterior rear-view mirror surfaces on both
sides tilt down automatically to the position
saved.
• If the gearshift lever is moved out of "R" gear
for over 10s, or the vehicle speed exceeds
10km/h, or the
selection switch returns to be
flat, the mirror surface will restore to the
previous position automatically.
• The function of manual tilting-
down in
reversing is affected by the selection of "L" or
"R", while the function of automatic tilting-
101
To Next Page
Loading...
