4. Operating System and Equipment
Defogging Function*
– When pulling/pushing button is pressed,
the indicator light of the button is on and the
heating function is enabled to remove fog or
frost from exterior rear-view mirrors and rear
windshield.
– This function will be disabled automatically
about 15 minutes later or it can be disabled
manually by pressing the pulling/pushing
button again during heating. When the heating
function is disabled, the indicator light goes
out.
Caution
• If defogging/defrosting is necessary after the
defogging function is automatically disabled,
lift/press the button again.
•
Do not have the defogging function operating
for a long time. This could cause overheating
or damage to the heater.
•
To save battery power, press the button to
disable the defogging/defrosting function
when it is unnecessary.
102
To Next Page
Loading...
