5. Driving Directions
Unlocking the Shift Lever
When the s
hift lever is at "P" position, if the
shift lever is locked and thus cannot be moved out
of the "P" gear due to a dead battery or other
causes, it is necessary to unlock the shift lever and
move it out of the "P" gear.
– Turn off the ignition switch.
– Prise out the shift lever leather cover ① in the
direction of the arrow.
– Push t
he lock switch ② in the direction of the
arrow to unlock, press the unlock button at the
front end of the shift lever at the same time,
and then switch the shift lever from "P" gear to
"N" gear.
– Install the shift lever leather cover.
– Press the brake pedal, start the engine and
check whether the shift lever restores the
normal engagement operation.
Caution
If the shift lever is locked and cannot be
withdrawn from the "P" gear, this method can be
used to for withdrawal. However, the occurrence of
this failure usually indicates that the vehicle may
have problems and should be checked and
repaired as soon as possible at your authorized
GAC Motor's dealer.
166
To Next Page
Loading...
