4. Operating System and Equipment
Caution
•
If the instrument cluster display "The sensor
fails, please control the lighting manually", for
the sake of safety, the system will keep low
beams turned on. In this case, you should
control the lighting manually, and go to an
authorized GAC Motor's dealer to have your
vehicle checked and repaired.
Auto lighting may fail in heavily foggy or misty
weather. Manually turn on the lights then.
Daytime Running Light
– With the engine started and the position lamp
is not turned on, the daytime running lights
can be automatically turned on. When the
position lights are off or the engine stops work,
the daytime running lights will be automatically
turned off.
Hint
Activate or deactivate daytime running light
via "Vehicle Setting → Light Control → Daytime
Running Light" in the audio system.
Position light
– By turning the light switch to position to
turn on position lights, the position lights,
instrument panel lighting lamp, number plate
lights are turned on and in the instrument
cluster is on accordingly.
If you forget to turn off the position lights,
when the ignition switch is put at "OFF" position,
the position lights will be turned off automatically to
save battery power in the following cases:
• If the vehicle
is locked, the position lights will
be turned off immediately.
• If the vehicle
is not locked, the position lights
will be turned off 15 later.
85
To Next Page
Loading...
