4. Operating System and Equipment
Warning
Never turn on the position light alone when
driving at night or in other road environment of low
visibility. Otherwise, it can cause accidents easily.
Low beams
– Turn the light switch to position to turn on
the low beams.
High beams
– Turn the light switch to position to turn on
the low beams.
– By pushing forward direction of the vehicle the
light combination switch to position, high
beams are turned on and in the instrument
cluster flashes.
– By pulling backward the light combination
switch to the original position, high beams are
turned off.
High Beam Flashing
– By pulling backward the light combination
switch to position, the high and low beams are
turned on.
– By releasing the light combination switch, it
returns to the original position automatically
and the high and low beams are turned off.
• High beams will dazzle the drivers of other
vehicles nearby and result in accidents.
Please use them properly.
•
When all the lights are turned off and the light
combination switch is pulled in the backward
direction of the vehicle,
beams will be turned on and corresponding
in the instrument cluster will come on.
86
To Next Page
Loading...
