4. Operating System and Equipment
INT: Intermittent Wiping*
– If the wiper combination switch is pushed to ③
INT position, the front wipers will work
intermittently at a certain frequency.
– For models with auto wiping function, switch
to the intermittent wiping mode via "Vehicle
Setting → Smart Body → Auto Wiping" in the
audio system.
– Rotate the knob ⑦ up/down to adjust the
intermittent wiping speed.
• A: Increase the intermittent wiping speed.
• B: Reduce the intermittent wiping speed.
LO: Low-Speed Wiping
– If the wiper combination switch is pushed to ④
LO position , the front wipers will work at a low
speed.
HI: High-Speed Wiping
– If the wiper combination switch is pushed to ⑤
HI position , the front wipers will work at a high
speed.
95
To Next Page
Loading...
