Programming Options
12
3 . 4 . Selecting Irrigation Days of the Week
This setting determines on which
days of the week the irrigation
controller will operate the valve
being programmed.
1 . Press
until appears
.
2 . Press . A blinking appears at
the top of the display, under
Monday.
3 . Select the desired day of the
week by pressing
.
4 . Selecting/adding irrigation
days:
Press
. The arrow under the
selected day will stop blinking.
The blinking arrow will move
one position to the right, to
appear at the next day of the
week. Select additional days of
the week in the same manner.
5 . Canceling Scheduled
Irrigation Days:
Press
. The arrow under the
selected day will disappear. The
blinking arrow will move one
position to the right, to appear at
the next day of the week. Cancel
additional scheduled irrigation
days in the same manner.
6 . Press
to go to the next
step.
* When the blinking arrow is
under Sunday, the next pressing
of
shows in the center,
and a
symbol at the right top
corner, of the display. To return
to "Selecting/adding irrigation
days" mode, press
again.
To Next Page
Loading...
Need help?
General
