Galcon DCS Series - Setting Time for Cyclical and One-Time Irrigation

Programming Options
16
4 . 3 . Setting Day of the Week and Time For Cyclical and
One-Time Irrigation
These options are used to pre-set
the valve opening time. The number
of days until valve opening appears
on the display, to the right of the
irrigation start time (above the word
“days”). 0 days = program starts
today; where 1 = program starts
tomorrow, etc. (up to 30 days).
1 . Press
until [1 ] appears. The
last opening time entered
appears on the display.
2 . Press
. The hours digits blink.
3 . Set the desired opening time by
pressing
or (Note: AM and
PM designations appear to the
left of the hour digits.)
4 . Press
until the digit to the
right of the opening time blinks
(The digit above the word
“days”).
5 . Set the number of days until
valve opening by pressing
or
.
6 . Press
3 times to return to the
main screen (clock).
* Valve openings 2, 3 and 4 are
canceled in this mode.