Additional Displays
23
5 . Additional Displays
5 . 1 . Valve Wait Mode (Models DC4S only)
When two valves are currently
open, and a third valve is scheduled
to open, the third valve will enter
into a wait mode. A blinking
will
appear above the number of the
valve which is on wait.
During “manual” irrigation system
operation via the irrigation
controller the letter “W” (Wait)
appears on the display. The valve
will open when another valve
closes.
5 . 2 . Blinking Low Battery Warning
A blinking battery icon appears on
the display when the batteries are
weak. In this state, a limited amount
of energy still remains in the
batteries for valve operation, and
they should be promptly replaced.
Press any button after replacing the
batteries to resume irrigation
controller activity.
Program data will be retained for
approximately 15 seconds during
battery changing.
To Next Page
Loading...
Need help?
General
