Galcon DCS Series User Manual

Programming Options
17
4 . 4 . Example: Programming A Cyclical Irrigation Schedule
Let’s assume that we want to program the irrigation controller to open the
valve at 12:45 PM, for a period of one hour, once every 5 days.
1 . Set the irrigation period as in Section 3.3, Setting the Irrigation Period
(Press
until appears, then set the desired irrigation period by
pressing
and ).
2 . Press
until appears.
3 . Press
a number of times (for all the days of the week) until
appears, blinking on the display.
4 . While the display blinks, press
or . The display reads every
X:XY, where X:XY is the irrigation operation frequency in hours and
minutes.
5 . Press
until the hours and minutes displays disappear, and the word
“days” appears with a number above. Press
until the number of days
changes to 5.
6 .
Press . [1 ] appears.
7 . Press
. The hours digits blink.
8 . Press
until the hours digits change to 12 (PM).
9 . Press
. The minutes digits blink.
10 . Press
until the minutes digits change to 45.

Galcon DCS Series Specifications

General

Brand	Galcon
Model	DCS Series
Category	Irrigation System
Language	English