Galcon S Series - Switching between AM;PM and 24 Hour Time Format; Valve Selection

3.2 Switching between AM/PM
and 24 Hour Time Format
The default time format is AM/PM. There is M Tu W Th F Sa Su
also a 24 hour time format. To switch
between the two formats:
1. Press © until the appears.
2. Press ©) The hours digits blink.
3. Press ® and © simultaneously. The
clock reading switches from AM/PM to a 24
hour time display or vice versa.
6056 - DC 6s
You can switch the time display
format at any step in the
programming process.
3.3 Valve Selection
This section does not apply to the
DC-1 model. M Tu W Th F SaSu
valve | be now
ee duration Sensor
Program an irrigation schedule for each valve days w.open
individually. First select the desired valve, and starts se
then program a schedule as follows: rain off
1. Press © until @ appears.
2. Press ®©. A blinking arrow appears at the
bottom of the display.
3. Move the arrow to the desired valve number | |E 6056-DC6s
by pressing ® and ©.
4. Press © to proceed to the next step.
10