Galcon S Series Installation And Operating Instructions

4.7 "Manual" Irrigation System
Operation via the Irrigation Controller ee
M Tu W Th F Sa Su
This function operates the selected valve for the
irrigation duration defined in the program. The valve
will close automatically at the end of the irrigation
duration.
Note that the originally programmed irrigation
schedule continues to operate at the set times.
1. Press © until & appears. Select one or more
valves as described in Section 3.3:
"Valve Selection".
2. Press © until @ appears.
3. Press ® to open the valve. The word "On" is
displayed. After an interval of 5 seconds, a
count down of the remaining irrigation duration
appears
on
the
display.
now
Mee
To close the valve manually, press ©. {i FF appears | eich
on
the
display.
w.close
4.To close the valve manually before the end of manual
the irrigation duration, press © until ON appears
again on the display.
Press © to close the valve.
Up to two valves can be operated simultaneously
in this manner. Simply repeat the above steps for
the second valve.
4.8 Sequential "Manual" Operation of
all the Valves
The valves can be operated sequentially, one after
the other.
1. Press © until the © appears.
2. When nothing is blinking on the display, press
and hold down ® for 5 seconds. Valve 1 will
open and operate for the programmed irrigation
duration. When valve 1 closes, valve 2 opens,
and so forth until the last valve has opened. All
the valves designated to open blink.
3.You can influence the process. Pressing ©)
closes the current valve and opens the next one.
4.Important: You can only exit this screen after
all the valves have opened.
6056 - DC 6s
18

Galcon S Series Specifications

General

Brand	Galcon
Model	S Series
Category	Controller
Language	English