Galcon S Series Installation And Operating Instructions

3.6 Setting Irrigation Start Times
M Tu W Th F SaSu
In this step, up to 4 separate irrigation start
times can be programmed for a selected day
for the valve being programmed. The selected
valve will open at each of the start times set,
for the irrigation duration set as described in
Section 3.4.
1. Press © until the START | appears.
The word or the last start time set will ee
appear on the display. F605 - DCs
2. Press ©) . The displayed item blinks
(OFF or last start time entered).
3. Set the desired start time by pressing
® and ©. (Take note of the AM and
PM designations). Repeat actions 2 and 3
to set start times Il, III and IV, as needed.
4. To cancel a specific start time, select it by
pressing © . Next, press ®©. The hour
digits blink. Press @ or © until the word
OFF appears on the display.
5. To program another valve, select it, and
repeat the above steps, starting from
section 3.3 above.
12

Galcon S Series Specifications

General

Brand	Galcon
Model	S Series
Category	Controller
Language	English