Galcon S Series Installation And Operating Instructions

4.3 Setting the Day of the Week
and Time
for Cyclical and One-Time Irrigation rome =
AI y
Programs ciao 7
These programs enable you to pre-set
the time of valve opening. The number
of days until the valve opening appears
on the display, to the right of the irrigation
start time (above the word "days"). 0
days = program starts today; 1 day =
program starts tomorrow, etc. (up to 30
days).
1. Press © until START [I ] appears. The last opening time entered appears
on the display.
2. Press © . The hour digits blink.
3. Set the desired opening time by pressing ® or © (Take note of AM and
PM designations).
4. Press until the digit to the right of the opening time blinks (The digit above
the word "days").
5. Set the number of days until the opening of the valve by pressing
®or ©.
‘Valve openings 2, 3 and 4 are canceled in this mode.
6056 - DC6s
15

Galcon S Series Specifications

General

Brand	Galcon
Model	S Series
Category	Controller
Language	English