GANSER LIFTSYSTEME GTLE - Page 36

GTLE Operating Manual Maintenance manual Page 31 of 35
Lfd.
Nr.
Work to be carried out
(Only by qualified technician)
Equipment / Materials
W1
W2
Comments
2.5
Spiral cable Guide rod
If present
2.5.1
Check for tight fit
☐
☐
2.5.2
Check the insulation of the cable, look for chafing points and kinks in
the cable.
☐
☐
2.6
Limit switches and charging points
2.6.1
Check for corrosion and clean the contact surfaces.
K3
☐
☐
2.6.2
Check function and tight fit of switches and screw connections.
☐
☐
2.7
Equipotential bonding conductor connection
2.7.1
Check for tight fit
☐
☐
2.8
Charging cable
2.8.1
Check the insulation of the cable and check for tight fit, look for
chafing and kinks in the cable.
K3 / K4
☐
☐
2.9
Rail profiles
2.9.1
Look for chipping, deformation and wear
☐
☐
2.9.2
Remove dirt
R1 / P1
☐
☐
3.
Lift unit
3.1
Guide rollers
3.1.1
Search for corrosion, chipping and deformation
☐
☐
3.1.2
Check for tight fit
☐
☐
3.1.3
Check function and adjustment
☐
☐
3.1.4
Check for noise and wear, lubricate bearings
S1 / S2 / S3
☐
☐
3.1.5
Remove contamination
R1
☐
☐
3.1.6
Check the preservation of the bearings and moving parts, if
necessary spray the areas with preservative.
K2
☐