44
- Firmware Upgrade
The operator can update the F/W by USB device or DVD.
After saving the F/W in the USB and DVD, insert it to the DVR.
Select the F/W upgrade button and the above “Firmware Upgrade” screen would be shown.
After selecting the F/W from list, select the “UPGRADE” button.
DVR would re-boot automatically when the upgrade is finished.
- Factory Default: System will be initialized.
- System Configuration
Save: Current configuration will be saved in USB and other device.
Load: The configuration that was saved from other DVR could be loaded in current DVR.
- Select Language
The operator could select the language.
Languages may differ, depending on the firmware.
Storage -> Operation
To Next Page
Loading...
