Page 37
490X Engineer’s Reference Guide
40) Press Yes. The display will show:-
41) To change this press No twice.
The display will show:-
42) Press Yes. The display will show:-
43) This concludes the programming for
Setting Modes. Press 0 (zero) to return to:-
Or
Press 0 (zero) until the display shows:-
Program Setting
for Auto-Part ?
Auto Part-Set
= Off
Auto Part-Set
= On
Program . . . . _ _ _
Setting Modes ?
01 Jan 00: 00: 01
490X 1.qxd 11/07/2006 12:32 Page 37
To Next Page
Loading...
