GARDTEC GT490X - Programming PGM1; Custom

Page 69
490X Engineer’s Reference Guide
9) Press No twice. The display will show:-
10) Enter a value 1 to 9 (1= Low 9 = High) followed by
Yes. The display will show:-
11) Press No. The display will show:-
12) Press Yes. The display will show:-
13) Press No twice. The display will show:-
14) Enter a value 1 to 9 (1 = Low 9 = High) followed by
Yes. The display will show:-
15) This concludes the program Sounder Levels
press 0 (zero) to move back to:-
Then Press 0 twice to move back to:-
Program . . . . _ _ _
Sounder Levels ?
Program Sounder
Ent / Exit Level ?
Program Sounder
Keypad Level ?
Program Sounder
Keypad Level ?
Keypad Level . . . .
= 05
Keypad Level . . . .
= _ _
Ent / Exit Level
= _ _
< < < < UN-SET > > > >
01 Jan 00: 00: 01
490X 1.qxd 11/07/2006 12:32 Page 69