Page 79
490X Engineer’s Reference Guide
The readings given from this point on are intended as Indicator Only and should
be confirmed with a calibrated Test Meter.
21) Press No. The display will show for example:-
22) Press Yes. The display will show for example:-
23) Press Yes. The display will show:-
The backlight will Dim at this point.
24) Press Yes. The display will show:-
25) This concludes the Program Diagnostics
Press 0 (zero) until the display shows:-
Aux. Volts
13.6V
Aux. Volts
13.6V
Battery Volts
On Charge 13.6V
Battery Volts
Off Charge 12.9V
01 Jan 00: 00: 01
490X 1.qxd 11/07/2006 12:32 Page 79
To Next Page
Loading...
