Page 92
490X Engineer’s Reference Guide
11) Press Yes the display will show:-
You MUST turn On the Triggers you require.
12) Use the Yes & No keys to accept or change
the options on the following screens:-
13) Press Yes. The display will show:-
Program Digicom
Channels ?
Set = Off Alrm = Off
UnSet = Off PA = Off
Set = Off Alrm = Off
UnSet = Off PA = Off
24Hr = Off E/E = Off
12Hr = Off Bat = Off
Tamp = Off AC = Off
LF = Off Alert = Off
Fire = Off W/D = Off
Duress = Off
Zone Remove = Off
Alrm - Restore = Off
AC - Restore = Off
LF - Restore = Off
After - Alarm = Off
Abort - Call = Off
Perimeter = Off
PA - Restore = Off
Radio Lost = Off
Radio Jamm = Off
Zone Fault = Off
Zone Mask = Off
490X 1.qxd 11/07/2006 12:32 Page 92
To Next Page
Loading...
