4 nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
Mounting the Device
Notice
Before mounting the device, see
the Important Safety and Product
Information guide for information
about laws pertaining to windshield
mounting.
1. Remove the clear plastic from the
suction cup.
2. Clean and dry your windshield
and the suction cup with a lint-
free cloth.
3. Place the suction cup on the
windshield.
4. Flip the lever back toward the
windshield.
5. Snap the mount
➊
onto the
suction cup arm
➋
.
➊
➋
About myDashboard
Use myDashboard to register your
device, check for software and map
updates, access product manuals and
support, and more.
Setting Up myDashboard
1. Connect the USB cable to the
USB connector on the device.
2. Connect the USB cable to the
USB port on your computer.
3. Go to www.garmin.com
/dashboard.
4. Follow the on-screen instructions.
To Next Page
Loading...
