Filtering the Geocache List
You can filter your geocache list based on certain factors, such as the level of difficulty.
1 Select Geocaching > .
2 Select one or more items to filter.
3 Customize the settings.
4 Select to apply the filter to the geocache list.
Creating and Saving a Geocache Filter
You can create and save custom filters for geocaches based on specific factors. After you set up the filter, you
can apply it in the geocaches list.
1 Select Setup > Geocaching > Filter Setup > Create Filter.
2 Select filter options.
3 Select .
The filter is named automatically.
Editing a Custom Geocache Filter
1 Select Setup > Geocaching > Filter Setup.
2 Select a filter.
3 Select an item to edit.
Navigating to a Geocache
1 Search for a geocache (Searching for a Geocache, page 12).
2 From the geocache details, select Go.
3 Navigate using the map (Navigating with the Map, page 10) or compass (Navigating with the Compass,
page 10).
4 As you approach the location of the geocache, use the hints and clues to help you find the hidden cache
(Using Hints and Clues to find a Geocache, page 13).
Using Hints and Clues to find a Geocache
You can use hints or clues, such as a description or coordinates, to help you find a geocache.
1 While navigating to a geocache, select Geocaching.
2 Select an option:
• To view details about the geocache, select Description.
• To view a clue about a geocache location, select Hint.
• To view latitude and longitude for a geocache, select Coordinates.
• To view feedback about the geocache from previous searchers, select Logs.
chirp
™
NOTE: This feature is not available for all device models.
A chirp is a small Garmin accessory that is programmed and left in a geocache. You can use your device to find
a chirp in a geocache.
Enabling chirp Searching
1 Select Setup > Geocaching.
2 Select chirp Searching > On.
Geocaches 13
To Next Page