GPSMAP 292/298 Owner’s Manual 69
MAIN MENU > UNITS TAB
When transferring data between two Garmin units,
always set one to Host and use the other unit to either
Send or Request the data.
To select an input/output format:
1. Highlight the Serial field, and press ENTER.
2. Use the ROCKER to select a setting, and press ENTER.
To select a transfer mode:
1. Use the ROCKER to select Garmin Data Transfer in the
Serial Data Format field.
2. Highlight the Transfer Mode field, and press ENTER.
3. Use the ROCKER to select a setting, and press ENTER.
Advanced NMEA settings to adjust the NMEA output are available
if you have one of the ports set to NMEA In/NMEA Out. Advanced
NMEA settings enable/disable certain sentences and adjust the
number of Lat/Lon output precision digits.
To Next Page
Loading...
