GPSMAP 400/500 Series Owner’s Manual 29
Where To?
3. Select a destination.
NOTE: Press the right or left arrow on the Rocker to view
additional information or to display the location on a chart.
4. Select Navigate To.
5. Select Go To or Route To.
OR
Select Guide To when using a preprogrammed BlueChart g2
Vision card to use Auto Guidance.
6. Follow the colored line on the screen to the destination.
To stop navigating:
Press MENU, and select Stop Navigating.
To search for a destination by name:
1. From the Home screen, select Where To? > Search by Name.
2. Use the Rocker to select characters and spell at least a portion
of the name of your destination.
3. Press SELECT to view the 50 nearest destinations that contain
your search criteria.
4. Select the location > Navigate To > Go To or Route To (or
Guide To when using a preprogrammed BlueChart g2 Vision
card).
To Next Page
Loading...
