11
1
1
I
1
1111
p
• To change the order of
the
points on the route,
select
Move Up or Move
Down.
• To insert an additional point
on
the route, select
Insert.
The additional point is
inserted
before the point you are
editing.
• To remove the point from
the
route, select
Remove.
6 Select QUIT to save the
route.
Viewing a Route on the
Map
1
Select Route
Planner.
2 Select a
route.
3 Select View
Map.
Deleting a
Route
1
Select Route
Planner.
2 Select a
route.
3 Select Delete
Route.
Navigating a Saved
Route
Before you can navigate using
a
saved route, you must create
a
route.
1
Select FIND >
Routes.
2 Select a
route.
3 Select
Go.
Viewing the Active
Route
1
While navigating a route,
select
Active Route.
2 Select a point in the route
to
view additional
details.
Stopping
Navigation
Select
FIND> Stop
Navigation.
Reversing a
Route
1
Select Route
Planner.
2 Select a
route.
3 Select Reverse
Route.
Tracks
A track is a recording of your
path.
The track log contains
information
about points along the
recorded
path, including time, location,
and
elevation for each
point.
Tracks
Settings
Select Setup >
Tracks.
Track Log: Turns track
recording
on or
off.
Record
Method:Sets
a
track
recording method.
Auto
records the tracks at a
variable
15
.
cp
.
To Next Page
Loading...
