Garmin GPSMAP 64s - Memory Card Installation and Computer Connection; Connecting Device to Computer



J
( : !
0
i i





You can install a microSD memory
card in the handheld device for
additionalstorage or pre-loaded
maps.
1 Turn the D-ring counter-
clockwise, and pull up to
remove the cover.
2 Remove the battery.
3 Slide the card holder < D to ii
and lift up.
4 Place the memory card with the
gold contacts facing down.



' ---- -- '
( >
-- _)



5 Close the card holder.
6 Slide the card holder to 1111 to
lock it.
7 Replace the battery and cover.
Connecting the Device to
Your Computer

NOTICE
To prevent corrosion, thoroughly
dry
the mini-USB port,the weather
cap, and the surrounding area
before charging or connecting to a
computer.
Before you can operate your device
while connected to your computer,
you must install batteries. The
computer USB port may not provide
enough power to operate the
device.
1 Pull up the weather cap from
the
mini-USB port.
2
Plug the small end of the USB
cable into the mini-USB port.
3
Plug the large end of the USB
cable into a computer USB
port.
On Windows computers, the
device appears as a removable
drive or a portable device , and
the
memory card may appear
as a
second removable drive.
On Mac computers, the device


47
