Garmin GPSMAP 64s - ANT+ Accessory Pairing and Data Management; ANT+ Accessory Pairing Guide

I
I 1
1
11
11 1
1
1
1
.
c
p
.








Tips for Pairing ANT+
Accessories with Your
Garrnin Device
• Verify that th e ANT+ accessory
is compatible with your Garmin
device.
•
Before you pair th e ANT+
accessory with your Garmin
device
, move 10 m (32.9
ft.)
away from other ANT+
accessories.
•
Bring the Garmin device within
range 3m (10ft.) of the ANT+
accessory.
•
After you pair the first time, your
Garmin device automatically
recognizes th e ANT+ accessory
each time
it is activated.
This process occurs
automatically when you turn
on the Garmin device and only
takes a few seconds when the
accessories are activated and
functioning correctly.
•
When paired , your Garmin
device receives data from only
your accessory, and you can go
near other accessories.
Data Management

NOTE: The device is not
compatible with Windows 95 ,98,
Me,Windows NT®,and Mac OS
10.3 and earlier.

File Types
The handheld device supports
these file types.
•
Files from BaseCamp or
HomePort™. Go to Garmin.
com/trip_planning
•
GPX track files.
•
GPX geocache files. Go to
Garmin.com/geocach e .
•
GGZ geocache files. Go to
Garmin.com/geocach e .
•
JPEG photo files.
•
GPI custom PO l files from the
Garmin PO l Loader . Go to
Garmin.com/products/poiloade r .

Installing a Memory Card
I WARNING
Do not use a sharp object to
remove user-replaceable batteries.

46



. cp .