11
1
1
I
1
1111
p
5 Complete the required
fields
• Select Take Photo to take
a
to name and describe
the
adventure.
6 If you want to change the
cover
photo for the adventure,
select
Change, and select a
different
photo.
7 Select
Finish.
Starting an
Adventure
Before you can start an
adventure,
you must send an adventure
from
BaseCamp to your
device.
1
Select
Adventures.
2 Select an
adventure.
3 Select
Start.
VIRBTM
Remote
Before you can use the
VIRB
Remote function, you must
enable
the remote setting on your
VIRB
camera.
The VIRB Remote function
allows
you to control your VIRB
camera
from a
distance.
1
From the main menu,
select
VIRB
Remote.
2 Select an
option:
• Select REC to record
video.
photograph.
Waypoint Averaging
Yo
u
can refine a waypoint location
for
more
accuracy.
When
averaging, the device takes
several
readings at the same location
and
uses the average value to
provide
more
accuracy.
1
Select
Waypoint Manager.
2 Select a
waypoint.
3 Select MENU
>Average
Location.
4 Move to the waypoint
location.
5 Select
Start.
6 Follow the
on-screen
instructions.
7 When the confidence status
bar
reaches 100%, select
Save.
For best results, collect four
to
eight samples for the
waypoint,
waiting at least 90
minutes
between
samples.
29
.
cp
.
To Next Page
Loading...
