Garmin GPSMAP 64s - Chirp 1 M; Sending and Receiving Data Wirelessly; Setting a Proximity Alarm

11 1
1
1
1
1
1
I
I
1
1
1111
.
c
p
.
2 Select an option:
chirp™

A chirp is a small Garmin accessory
that is programmed and left in a
geocache. You can use your device
to
find a chirp in a geocache.For
more information about the chirp,
see
the chirp Owner's Manual at
Garmin.com.

Enabling chirp Searching
1 From the main menu, select
Setup > Geocaches.
2 Select chirpTM Setup> chirp™
Searching > On.

Sending and Receiving
Data Wirelessly
Before you can share data
wirelessly, you must be within 3m
(10ft) of a compatible device.
Your device can send and receive
data when paired with another
compatible device or smartphone
using Bluetooth® or ANT+TM
wireless technology. You can share
waypoints, geocaches, routes,
tracks, photos, and custom maps.
1
Select Share Wirelessly.
•
Select Send, and select a type
of data.
• Select Receive to receive data
from another device . The other
compatible device must be
attempting to send data.
•
Select BaseCamp Mobile
to pair the device with the
BaseCamp TM Mobile application
on a
compatible smartphone.
3 Follow the on-screen
instructions.

Setting a Proximity Alarm
Proximity alarms alert you when
you are within a specified range of
a particular location.
1
From the main menu , select
Proximity Alarms
> Create
Alarm.
2
Select a category.
3
Select a location.
4
Select Use.
5
Enter a radius.
When you enter an area with a
proximity alarm, the device sounds
a tone.


24



. cp .