Garmin GPSMAP 64s - System Settings Configuration

11 1
1
1
1
1
1
I
I
1
1
1111
.
c
p
.
be navigating fo
r
this data to
appear.
Vertical Speed:The rate of ascent
Navigation Overlay Service
(WAAS/EGNOS) data. For more
information about WAAS, go to

or descent over time.
Vertical Speed To Dest: The
rate of ascent or descent to a
predetermined altitude. You
must be navigating for this data
to appear.
Waypoint At Dest: The last point
on the route to the destination.
You must be navigating for this
data to appear.
Waypoint At Next: The next
point on the route. You must
be
navigating for this data to
appear.

System Settings
Select Setup> System.
Satellite System: Sets the
satellite system to GPS, GPS
+ GLONASS , or Demo Mode
(GPS off ) .
WAAS/EGNOS: Enables the
system to use Wide Area
Augmentation System/
European Geostationary
Garmin.com/aboutGPS/waas.
html.
Language: Sets the text language
on
the device.
NOTE: Changing the text
language does not change the
language of user-entered data
or map
data, such as street
names.
Interface: Sets the format of the
serial interface ( Seria l Interface
Setting
s ) .
AA Battery Type: Allows you to
change they type of AA battery
you are using.
NOTE: This setting is disabled
when the NiMH battery pack is
installed.

Serial Interface Settings
Select Setup > System >
Interface.
Garrnin Spanner:Allows you to
use the device USB port with
most NMEA 0183-compliant


37



. cp .