Projecting a Waypoint from a Saved Waypoint
You can save a new waypoint by projecting the distance and bearing from a saved waypoint to a new location.
1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Project Waypoint.
6 Enter the bearing, and select Done.
7 Select a unit of measure.
8 Enter the distance, and select Done.
9 Select Save.
Moving a Waypoint on the Map
1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Move Waypoint.
6 Press , , , or to move the cursor to a new location on the map.
7 Select Move.
Finding a Location Near a Waypoint
1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Find Near Here.
6 Select a category.
The list displays locations near the selected waypoint.
Setting a Waypoint Proximity Alarm
You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range
of a particular location.
1 Press MENU twice to open the main menu.
2 Select Waypoint Manager.
3 Select a waypoint.
4 Press MENU.
5 Select Set Proximity.
6 Enter the radius.
When you enter an area with a proximity alarm, the device sounds a tone.
Navigation 13
To Next Page
Loading...
